tecanic1 Posted October 14, 2005 Share Posted October 14, 2005 just a question .. anyone out there having phantom issues with wds. one issue i had focus with third return on evap code ..diag with wds shows bleed up and fails test. diag as bad canister vent and verified on bench test ..replace part and retest still fails after new gas tank .fuel pump and many other parts per feild engineer probem with wds and roadtest to clear p1000 ...well cars been gone one month no issues.. then the other day diag 6.0 e series as bad injector .passes all other test ..replace injector and retest now fails relative compression on 3 and 4 .... tech next to me tries to diag expidition abs light and will not perform koeo but can watch pids and passes networktest ........thanks for the input sorry so long .. Quote Link to comment Share on other sites More sharing options...
Torqued_Up Posted October 15, 2005 Share Posted October 15, 2005 What software version are you running? We just installed B39 and it seems to be running ok but it's only been a few days Quote Link to comment Share on other sites More sharing options...
tecanic1 Posted October 16, 2005 Author Share Posted October 16, 2005 all software up to date in all the wds's feild engineer says its a quirk in the software some do it some dont Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted October 18, 2005 Share Posted October 18, 2005 We are running the latest too with no issues that I know of. I asked a couple of the other guys and no reports of misbehaving. Did you run the update function after you installed the disk? I always do and there must be updates because it takes forever to download and the unit usually resets afterwords. Quote Link to comment Share on other sites More sharing options...
HGM Posted October 20, 2005 Share Posted October 20, 2005 You may want to try to re ghost the machine to see if it helps. Sometimes they get a glitch from adding update after update. If you havent done so, you can plug a keyboard and mouse into the WDS. Boot it up, CTRL-ALT-DEL, close TabMan. This will give you the regular windows screen. Open the start menuse and do a clean-up and Defrag. Reboot the machine, reinstall your latest blue disc. About 10% into the reinstall, eject the disc. You'll have to reinstall it again, maybe along with the red disc as well. If you run into a problem, or dont understand my details, the diag equipment prompt on Hotline can assist you.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.