Torqued_Up Posted February 7, 2006 Share Posted February 7, 2006 Does anybody know what the most current version of MD Truck is? I am using disk H3 with the IC4 COM adapter. I was told that the new disk will run on any PC but this disk won't load because it's not on a WDS machine. Quote Link to comment Share on other sites More sharing options...
HGM Posted February 8, 2006 Share Posted February 8, 2006 H-6 I have been told it can be used on a laptop too. Dont see why it wouldnt, but havent tried it.. Call the service number on your WDS machine, they should be able to help. Quote Link to comment Share on other sites More sharing options...
Torqued_Up Posted February 8, 2006 Author Share Posted February 8, 2006 Are you sure about that? I am running H3 as well as WDS software which is at A6. This is MD Truck not WDS. I hope I am not running seriously outdated software! I couldn't be missing three updates?!?!?!?! Quote Link to comment Share on other sites More sharing options...
HGM Posted February 8, 2006 Share Posted February 8, 2006 Yea,I have H-6 in my hand right now.. I'd give the WDS hotline.. Quote Link to comment Share on other sites More sharing options...
Torqued_Up Posted February 8, 2006 Author Share Posted February 8, 2006 ...a call. I guess I need to get on somebody here at my dealership about this. Thank you. Quote Link to comment Share on other sites More sharing options...
HGM Posted February 8, 2006 Share Posted February 8, 2006 Thanks for completing my thought..... They should be able to help.. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted February 9, 2006 Share Posted February 9, 2006 Hmmm, I have H-3 too! Maybe this explains some of the problems I am having using NETS and that it shows the LCF's as having Allison transmissions! Whoops! Quote Link to comment Share on other sites More sharing options...
WGLR13MWZ Posted February 10, 2006 Share Posted February 10, 2006 H-6 is the latest as HGM said. I had to get a dealers MD Fleet up and running for them a couple of weeks ago. Rotunda will not help you unless you have the latest version installed. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted March 24, 2006 Share Posted March 24, 2006 I finally had to make the call myself. Yes, H6 is the current version. Don't know why I have not gotten any updates but Teledyne is sending me a disk next week. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted March 29, 2006 Share Posted March 29, 2006 I got my disk today and it is a "burned" copy with "H-6" scribbled on the label. Despite being told by "someone" at the HotLine that it will load and run, I get the same stop error informing me that this software can only be loaded on a WDS. I was told it would run on a PC including IDS. I am suspicious. Could someone who has a "real" copy of MD Truck (H-6) PLEASE try loading it onto a stand alone PC or laptop? I need to know the truth! Toruedup? Thanx for putting the idea of doing this into my head! Did you ever get your disk? Quote Link to comment Share on other sites More sharing options...
HGM Posted March 29, 2006 Share Posted March 29, 2006 Sorry, I think I suggested that it would work.... From what I have heard recently, there is an issue with XP.. So, maybe the next version will work.. Does it work on your WDS?? Quote Link to comment Share on other sites More sharing options...
John Arndt Posted April 2, 2006 Share Posted April 2, 2006 ZTSE 4463=7 is the lastest version. If you go www.SPXinternational.com or wwww internationaldelivers.com, and then go to parts and service you will find the tool page and the computer requirements. You can not copy the program and the activate on a different computer, other then the one the original install. Must get pass words from International Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.