Cetane Posted December 16, 2007 Share Posted December 16, 2007 Do you guys know what part number(14C026) you are installing when you update the cluster on a J1 '08 SD? I have a fleet of trucks built early Nov '06 and it is time to update the IC/PCM/TCM. The PCM/TCM updates are updating fine but the only update I can find for the IC will install but then the message center gives me a "No configuration" message and a bunch of codes so I have to backdate it to the original level. I dont have access to an IDS to see what the updated cal # is. Thanks Quote Link to comment Share on other sites More sharing options...
LARRY BRUDZYNSKI Posted December 20, 2007 Share Posted December 20, 2007 Get me a vin and I will get you a number# Cetane where have you been??? Quote Link to comment Share on other sites More sharing options...
Cetane Posted December 20, 2007 Author Share Posted December 20, 2007 I tried that method but these are all pre-production trucks, they dont show up as valid vin numbers in any system. I was hoping somebody could look through the calibration file folder for IDS and tell me the suffixes that they have for the trucks(8C3T-14C026-??). I appreciate the response though. I have been pretty transparent on the boards for a few reasons. I moved to another new position which is keeping me really busy. Also I am still a little weary about posting too much because my employer has infiltrated this site and they are still looking to get rid of people. That said if there were questions I could help with I would still post as much as I could. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted December 20, 2007 Share Posted December 20, 2007 I am not sure what calibration files you are referring to but if I look at some vehicle session log files I come up with "IC Part Number=(8C3T_10849_RG) and (8C3T_10849_GG) I know IDS displays module numbers during the reprogramming process, I believe these numbers to be those. Is this what you are looking for? Quote Link to comment Share on other sites More sharing options...
Cetane Posted December 20, 2007 Author Share Posted December 20, 2007 Those are the physical IC part numbers. There should be a folder called C: program files/ford motor company/calibration files or something close to that. It is the same folder the as built data from PTS tells you to save some text file to(dont know what the reason is for that). In that folder there should be some 8C3T-14C026-XX files. Probably AD and BD suffixes but there may be some C* and D* as well. Thanks Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted December 20, 2007 Share Posted December 20, 2007 8C3T-14C026-AB 8C3T-14C026-DB Quote Link to comment Share on other sites More sharing options...
Cetane Posted December 20, 2007 Author Share Posted December 20, 2007 Thank you. That file combo is an interesting mix, must not be too many cluster updates out there. Does IDS tell you what file you are installing? Do you have the ability to see what file is currently installed(any module)? Quote Link to comment Share on other sites More sharing options...
Jim Warman Posted January 16, 2008 Share Posted January 16, 2008 Yes... for the PCM, TCM and IC, anyway... It lists both the current cal. as well as what it would be replaced with... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.