Rotunda 6.4 special wrench kit

Tony302600 · August 19, 2008

Anybody know what the 6.4 Special wrench kit number is for rotunda. I can't find the number i know the kit exists, has all the special wrenches we need to work on these motors?

Bruce Amacker · August 19, 2008

The red box triple set? TKIT-2006SD FLM

Good Luck!

Jeff_ · August 19, 2008

Go to the Rotunda RTTP page and click "featured tools" it's right there.

Product Details for RTTP-6.4L-KIT

GearWrench 6.4L Torque Adapter Kit

RTTP-6.4L-KIT

ROTUNDA

1 - GearWrench 10mm/12mm half-moon shaped ratcheting wrench.

1 - GearWrench 11mm/13mm half-moon shaped ratcheting wrench.

1 - 11mm allen head socket, 3/8 drive.

1 - 12mm allen head socket, 3/8 drive.

1 - 10mm to 1/4 drive GearWrench socket adapter.

1 - 10mm 12 point deep socket, 1/4 drive.

$79.95

NOTE: You may also want to pick up a Snap-On

FRDHM15

because it's easier to torque the hp pump gear with this,

not to mention easier for calculating the proper torque.

Keith Browning · August 19, 2008

Uhghh! I was looking for this and totally missed it on the RTTP site. Not necessarily a bad thing but then I e-mailed them asking about it and it is right there like you pointed out. /forums/images/%%GRAEMLIN_URL%%/blush.gif There is one wrench that is not there that probably should be added and that is for the 15mm fuel pump gear bolt, Snap-On #FRDHM15.

Tony302600 · August 19, 2008

Go to the Rotunda RTTP page and click "featured tools" it's right there.

Product Details for RTTP-6.4L-KIT

GearWrench 6.4L Torque Adapter Kit

RTTP-6.4L-KIT

ROTUNDA

1 - GearWrench 10mm/12mm half-moon shaped ratcheting wrench.

1 - GearWrench 11mm/13mm half-moon shaped ratcheting wrench.

1 - 11mm allen head socket, 3/8 drive.

1 - 12mm allen head socket, 3/8 drive.

1 - 10mm to 1/4 drive GearWrench socket adapter.

1 - 10mm 12 point deep socket, 1/4 drive.

$79.95

NOTE: You may also want to pick up a Snap-On

FRDHM15

because it's easier to torque the hp pump gear with this,

not to mention easier for calculating the proper torque.

Thanks /forums/images/%%GRAEMLIN_URL%%/thumbup.gif

Brad Clayton · August 20, 2008

Quote:

NOTE: You may also want to pick up a Snap-On
FRDHM15
because it's easier to torque the hp pump gear with this,
not to mention easier for calculating the proper torque

There is one wrench that is not there that probably should be added and that is for the 15mm fuel pump gear bolt, Snap-On #FRDHM15

Looks like Keith is still running a little behind /forums/images/%%GRAEMLIN_URL%%/coffee.gif

slim · August 20, 2008

I haven't had to mess with the high pressure pump yet, what do you need the FRDHM15 adapter for? I am guessing a new pump doesn't come with a gear attached. I hate to be in the middle of job and need a tool.