BustedKnucklez Posted February 19, 2009 Share Posted February 19, 2009 Does anyone know the part number for the pigtail that connects to the EOT sensor on a 6.0L PSD? Its the one that is exactly like the one on the IAT2. I couldn't find it in the motorcraft connector book. Quote Link to comment Share on other sites More sharing options...
Bruce Amacker Posted February 19, 2009 Share Posted February 19, 2009 Probably not what you're looking for, but I have IH PN 2501106C1 or ZTSE4437-4 in my notes. I don't have the Ford numbers. Good Luck! Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted February 19, 2009 Share Posted February 19, 2009 I have three from salvaged harness' I'll sell you one for a couple grand! If you REALLY need one and there is no big rush I could toss one in the mailbox and send it off to you. Have you looked for a different connector that might work? WPT-357 maybe? Quote Link to comment Share on other sites More sharing options...
LARRY BRUDZYNSKI Posted February 19, 2009 Share Posted February 19, 2009 I think your looking for a WPT-420 it lists for the Air Charge Temp. Connector. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted February 19, 2009 Share Posted February 19, 2009 That one wont work Larry as the locating tabs on the ends are not spaced correctly... in fact, the one I suggested wont work either as they simply dont fit around the sensor. Quote Link to comment Share on other sites More sharing options...
BustedKnucklez Posted February 20, 2009 Author Share Posted February 20, 2009 I appreciate the help guys. A coworker actually had an old harness that I was able to cut it off of. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.