BustedKnucklez Posted March 15, 2009 Share Posted March 15, 2009 I have this side job for a friend of a friend that intermittenly wont start. He says that he notices that this happens when his "wait to start" light doesn't turn on when he cycles the key on. I got a p0403. He told me he disconnected the batteries trying to get it to start. Any ideas? Quote Link to comment Share on other sites More sharing options...
Rickster42 Posted March 15, 2009 Share Posted March 15, 2009 Unplug the ebp sensor when it is a no start - do you get the wait to start light back? They used to short to vref and cause no start. Quote Link to comment Share on other sites More sharing options...
SteveS Posted March 16, 2009 Share Posted March 16, 2009 If there is a chip on the PCM it might have a poor connection to the board. Can happen if the clear sealant was not properly cleaned off or if the chip was not taped in place it can loosen the connection of the pins. No WTS light = no startie. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.