b-cast message 2087 bedplate reseal procedure

[jaysonfordtech]

Well guys its now official that we are suppose to use a sealer when installing the bedplate seals. I always used a thin coat of gray on the outside ridge of the block to bedplate area, and had good luck. Now they say to use red gasket maker. How much longer until that is a tsb as well?

[Jim Warman]

Jay.. the very bad thing about some of the broadcast messages is that they never make it to something we can "recall" with an OASIS query. At some point, that will leave us with a situation that will likely involve a charge back or similar...