Keith Browning Posted October 18, 2009 Share Posted October 18, 2009 Cetane tipped us off to a video about the 2011 Super Duty at a truck pull. I don't see any billowing smoke and it looks like it hooked up nicely too. And as you could imagine there are idiots looking to mod these things already. Quote Link to comment Share on other sites More sharing options...
Aaron Posted October 18, 2009 Share Posted October 18, 2009 So close to a FULL PULL.... Quote Link to comment Share on other sites More sharing options...
jimmy57 Posted October 18, 2009 Share Posted October 18, 2009 Did he run out of power or did the truck shut down because it ran low on Diesel Exhaust Fluid? Looks like an F350 with the wide front end option (unless wide front end is std on '11 F350 DRW 4X4). Quote Link to comment Share on other sites More sharing options...
LARRY BRUDZYNSKI Posted October 18, 2009 Share Posted October 18, 2009 Didn't notice, maybe it went into Regen??? Quote Link to comment Share on other sites More sharing options...
Jim Warman Posted October 18, 2009 Share Posted October 18, 2009 Certainly looks like SOMETHING coming out of the tailpipes. But Kieth is right... there will always be those modifiying diesels.... If you add a chip to a gas powered truck... you have a gas powered truck with a chip... HO-HUM!!!! Chip a turbo diesel??? No brains required... or is that "brains will be a handicap". Quote Link to comment Share on other sites More sharing options...
Cetane Posted October 19, 2009 Share Posted October 19, 2009 The video was pretty poor but it looked like white smoke. Wouldn't surprise me, if they were sitting there idling for a long time or if the exhaust was cold. There is even more mass for water to accumulate in now. The truck is a 450 with 4.30 gears, I doubt it ran out of power. They probably don't know what they are doing and got out of it early. Or maybe they had enough sense to stop before something broke(unlikely, they are engineers). By the way how did this end up in the 6.4 category? Quote Link to comment Share on other sites More sharing options...
Jim Warman Posted October 19, 2009 Share Posted October 19, 2009 By the way how did this end up in the 6.4 category? This is what I've been talking about... every last one of us has feet made of clay... shit happens... things break... switches leak.... Mistakes are made.. and sometimes, they aren't - but shit's bad anyway... homo erectus strikes again... Quote Link to comment Share on other sites More sharing options...
Adam_Dodson Posted October 19, 2009 Share Posted October 19, 2009 looks like he stayed out of it to keep the tires from spinning, doesnt look like alot of traction to be had there. Especially with those awesome factory tires! Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted October 19, 2009 Author Share Posted October 19, 2009 By the way how did this end up in the 6.4 category? I hadn't started drinking my coffee yet as it was brewin whilst I posted. As you can see it has meen moved. Quote Link to comment Share on other sites More sharing options...
zog Posted October 28, 2009 Share Posted October 28, 2009 I'm guessing a good set of GY MTRs and that would still be rolling! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.