Aaron Posted November 20, 2009 Share Posted November 20, 2009 2950 - 2003-2007 F-SUPER DUTY/2003-2005 EXCURSION/2004-2010 E-SERIES VEHICLES EQUIPPED WITH A 6.0L DIESEL - CALIBRATION UPDATE-VARIOUS ISSUES SEE TSB 09-24-03 FOR DETAIL 09-24-03 FINALLY! EOT/ECT spread will set DTC's!!!! FINALLY! Quote Link to comment Share on other sites More sharing options...
Alex Bruene Posted November 21, 2009 Share Posted November 21, 2009 Yippee! Quote Link to comment Share on other sites More sharing options...
Aaron Posted November 21, 2009 Author Share Posted November 21, 2009 Not that it matters, people are just gonna drive the fuckers around with the CEL or wrench lamp on anyhow... Quote Link to comment Share on other sites More sharing options...
Mekanik Posted November 21, 2009 Share Posted November 21, 2009 That puts a smile on my face. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted November 21, 2009 Share Posted November 21, 2009 I can see the next Monkey House home brew "fix" coming. It is the EOT/ECT sensor combo harness. Yes! Simply disconnect both sensors and connect this handy dandy jumper into both harness connectors then plug the other end into just the ECT sensor. Problem solved. now the processor will read EXACTLY the same temperature and no check engine light! Fucking brilliant if I do say so! I'll betcha some jackoff WILL try this at some point. Quote Link to comment Share on other sites More sharing options...
Aaron Posted November 21, 2009 Author Share Posted November 21, 2009 ^^^^^ You know, I figured this was gonna happen, as soon as I read the TSB. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.