Scott Posted December 2, 2009 Share Posted December 2, 2009 I replaced the fuel lines on the front of the engine - can not get fuel system primed - used vacuum to pull fuel up to pump - no luck - anyone know any tricks to getting fuel system Primed??? Thanks for your help. Quote Link to comment Share on other sites More sharing options...
Scott Posted December 2, 2009 Author Share Posted December 2, 2009 Got the problem figured out - thanks. Quote Link to comment Share on other sites More sharing options...
Brad Clayton Posted December 2, 2009 Share Posted December 2, 2009 Anytime I run into that on one of the oldys with the cam driven lift pump, I remove the fuel pressure test plug in the head, left or right. Spin er over and it's just like bleeding a brake caliper, spits and sputters air and fuel and away she goes. (on edit) The statement above actually applies to Gen II units. If someone runs them low enough on fuel the heads can get air bound. I can't recal ever having a problem with Gen I units. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.