Jump to content

Boost on 6.0

Rate this topic


Recommended Posts

What is the most boost you guys have seen, drove an 03 today that hit 39 psi, ran like no other truck ive ever drove, it was a trade in over the weekend, open hood and antifreeze was puking everywhere, the look on the used car managers face was priceless when i told him about it, serves the stupid fuckers rite.

Link to comment
Share on other sites

Umm... 39 PSI is a little high. Current calibrations start doing things to slow the turbo and de-rate the engine approaching 26 PSI and even with a stock calibration and a stuck turbo I personally have never seen more than 30-32 PSI a few years ago with older calibrations. I would suspect a non-OEM calibration in this truck then I might test the turbo.

Link to comment
Share on other sites

Turbo was most probally froze up,had the k&n filter,4 inch exhaust,so im sure it had a aftermarket tune in it,i guess it will become someone eles problem heading to the auction, that truck is the second one ive seen with that much boost, both were early 04s first blew the side of tank off the intercooler

Link to comment
Share on other sites

Drove a truck a guy had a big (+310hp) tune on at the track, he uses it as a drag vehicle (no plates, rollcage, etc.) (at 8k lbs, don't ask me why), it was upwards of 65psi (6.4)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...