robp823 Posted April 26, 2010 Share Posted April 26, 2010 I have a set of extra set of head gaskets from a 6.0.Im trying to figure out if they are 18mm dowel or 20mm.The part number on them is 1850307C1.I know you can use the stepper dowel but i have none and my buddies truck needs head gaskets and im prolly gonna do them for him. Quote Link to comment Share on other sites More sharing options...
joshbuys Posted April 26, 2010 Share Posted April 26, 2010 use a digital caliper to measure the dowel pin holes. Quote Link to comment Share on other sites More sharing options...
robp823 Posted April 26, 2010 Author Share Posted April 26, 2010 true Quote Link to comment Share on other sites More sharing options...
Aaron Posted April 26, 2010 Share Posted April 26, 2010 Yup. I'd measure the holes. The 18mm gaskets will have a ~18mm hole, and the 20mm gaskets will have a ~20mm hole Quote Link to comment Share on other sites More sharing options...
Brad Clayton Posted April 27, 2010 Share Posted April 27, 2010 Thank you Captain Obvious. Quote Link to comment Share on other sites More sharing options...
robp823 Posted April 28, 2010 Author Share Posted April 28, 2010 ahahahha thanks guys sometimes my brain stumbles. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.