Keith Browning Posted May 5, 2010 Share Posted May 5, 2010 21274 2011 F- SUPER DUTY - 6.7L DIESEL - TICK/TAP NOISE AT IDLE SOME 6.7L DIESEL EQUIPPED VEHICLES MAY EXHIBIT A 'TICK/TAP' OR 'TYPEWRITER' TYPE NOISE AT IDLE THAT MAY BE ISOLATED TO THE MAIN ENGINE BEARING AREA. THIS NOISE SHOULD BE CONSIDERED 'CHARACTERISTIC' AS IT IS NOT DETRIMENTAL TO ENGINE DURABILITY. 6.7L DIESEL ENGINES INCLUDE DESIGN IMPROVEMENTS TO REDUCE OVERALL INHERENT DIESEL ENGINE NOISE. THESE SOUND REDUCTION IMPROVEMENTS ENABLE CERTAIN CHARACTERISTIC NOISES TO BE MORE EASILY HEARD. USING THE INCORRECT ENGINE OILS FOR THE VEHICLES OPERATING CONDITIONS CAN NEGATIVELY IMPACT THE LEVEL OF NOISE EXPERIENCED. REFER TO VEHICLE OWNER GUIDES AND MAINTENANCE GUIDES FOR APPROVED ENGINE OIL VISCOSITIES AND USAGE INFORMATION. CUSTOMERS SHOULD BE INFORMED THAT THESE CONDITIONS DO NOT AFFECT ENGINE DURABILITY AND NO REPAIRS ARE NECESSARY. EFFECTIVE DATE: 03/29/2010 I am calling bullshit on this one. I have performed PDI's on about 10 6.7L trucks now and all sounded perfect. Until today. Wait till you hear this sound. Are they kidding? Seriously? Do they think anyone is going to buy a truck making that noise? Quote Link to comment Share on other sites More sharing options...
Shlep Posted May 6, 2010 Share Posted May 6, 2010 And the fun begins .... I really hope this isn't the start of things to come. Quote Link to comment Share on other sites More sharing options...
Aaron Posted May 6, 2010 Share Posted May 6, 2010 Ours was quiet, till it got ran past 3000RPM Sounds like the 6.4 tapping. In other news: Had a 6.2 making a weird tapping/popping noise today. One of the plug wires had fallen off the lower spark plug. No driveability concerns to note -- but the weird tapping/popping noise is the spark arcing to the head. Turn truck off, install plug wire, all is good. They sure don't snap on very tight. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted May 6, 2010 Author Share Posted May 6, 2010 According to "sources" the typewriter noise will go away. This one might be a hard sell... Quote Link to comment Share on other sites More sharing options...
Aaron Posted May 6, 2010 Share Posted May 6, 2010 ROFL Once the crank self-clearances the bearings. Quote Link to comment Share on other sites More sharing options...
fordtech03 Posted May 6, 2010 Share Posted May 6, 2010 And the fun begins .... I really hope this isn't the start of things to come. At least they made everything easy to get at for the most part. Quote Link to comment Share on other sites More sharing options...
Aaron Posted May 7, 2010 Share Posted May 7, 2010 Yeah, the MAP sensor.... Quote Link to comment Share on other sites More sharing options...
Shlep Posted May 7, 2010 Share Posted May 7, 2010 Yeah, the MAP sensor.... LMAO ain't that the truth Quote Link to comment Share on other sites More sharing options...
tec80 Posted May 20, 2010 Share Posted May 20, 2010 Oil pressure relief valve tapping against the stop at hot idle? That's what it ended up being on 3.8/4.2... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.