kevin41 Posted July 20, 2010 Share Posted July 20, 2010 SERVICE MANAGER WOULD LIKE TO START WORKING ON LOW CAB FORWARD TRUCKS BUT HAS NOT PURCHASED M-D CABLE YET WE HAVE A CUSTOMER THAT HAS ONE THAT RUNS ROUGH BUT WE HAVE NO WAY TO COMMUNICATE WITH ECM IS THERE ANOTHER SCANNER THAT WOULD AT LEAST READ CODES? THANKS IN ADVANCE FOR ANY INSIGHT. I WILL ALSO CHECK LCF POST Quote Link to comment Share on other sites More sharing options...
Bruce Amacker Posted July 22, 2010 Share Posted July 22, 2010 Any HD scanner that has the 9 pin Deutsch will read codes from this truck, but even finding one of those might be a challenge. Probably any software will read the codes, even if it is Cat, Cummins, etc. Good Luck! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.