Jump to content

6.0 fuel injector test harness

Rate this topic

Mr.Meanwrench
 Share

Recommended Posts

Mr.Meanwrench

Mr.Meanwrench

Posted
Posted

I saw a posting some time ago about someone making an injector test harness from a core fuel injector. I have a few harnesses and am looking to make some of these tools. Could you point me in the right direction? Thanks in advance.

Link to comment
Share on other sites
Keith Browning

Keith Browning

Posted
Posted

Are you talking about making a "noid light?" The injector connector is used to plug into the injector harness and the coil circuits are wired to two small 12V bulbs. When running the injector electrical self test with he tester installed both lights should flash... that is how I made mine and how I use it.

 

If you have an old injector harness you can cut off one connector with a length of wire, identify the circuits for each coil. You plug that into a suspect injector to make it easier to check the resistance of the spool valve coils... as you would when performing pinpoint tests "P"

 

SEE THIS TOPIC

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...