1995 f350 oil leak at h.p. pump

kevin41 · December 15, 2010

working on 1995 f350 7.3 and the gasket between the front cover and the high pressure pump keeps blowing out. verified leak at gasket between pump and cover, replaced gasket using work shop manual procedures, two days later gasket is blown out again. any input as to root cause of gasket failure would be greatly appreciated.the motor is a ford reman with 20,000 miles on it. thanks again

Brad Clayton · December 15, 2010

That gasket is build date sensitive, there are two different design gaskets that are very similar around that year model but not interchangeable.

Bruce Amacker · December 16, 2010

There's nice pictures of the changes on P42 of the Gen 2 CTB linked on your left.

Good Luck!

Posted Image

Brad Clayton · December 16, 2010

kevin41 · December 17, 2010

Thanks for the input, due to the cold weather here I was pulled off that truck and asigned other work. Going back to work on it today, I will check gasket part #s to see if I have correct gasket. Thanks again!