6.4 wrench light on lack of power.

[gtech]

-Customer is complaining of reduced power message coming on in dash and truck has no power,i can't get it to happen and the only code that i get is a p0234 performed ppt(e)couldn't find anything wrong with map, manifold,restrictions,no issues with cac or connections.

-map pid(volt)0.74 - 14.53psi koeo.

-map sensor correlation test:is good.

map(press)pid 14.53psi.

ebp_a(press)pid14.42psi.

baro(press)pid14.35psi.

-performed harness wiggle test,still cannot duplicate issue for customer.

this has happened to him 3 times.

-Freeze freme data for p0234

flt 42c degrees.

eot 93c degrees.

baro 14.645psi.

rpm 2275.

kph 98.

map 36.975psi

 

any help or suggestions very much appreciated.

[gtech]

this is a 2010 f250 with a 6.4.

-Customer is complaining of reduced power message coming on in dash and truck has no power,i can't get it to happen and the only code that i get is a p0234 performed ppt(e)couldn't find anything wrong with map, manifold,restrictions,no issues with cac or connections.

-map pid(volt)0.74 - 14.53psi koeo.

-map sensor correlation test:is good.

map(press)pid 14.53psi.

ebp_a(press)pid14.42psi.

baro(press)pid14.35psi.

-performed harness wiggle test,still cannot duplicate issue for customer.

this has happened to him 3 times.

-Freeze freme data for p0234

flt 42c degrees.

eot 93c degrees.

baro 14.645psi.

rpm 2275.

kph 98.

map 36.975psi

 

any help or suggestions very much appreciated.

 

 

 

[lmorris]

This is a false code set after the last update recall. Ford engineers are currently working on a fix. Will keep you posted.

At this point all you can do is tell the customer "sorry but you gotta put up with it for now".

[Keith Browning]

Which begs the question, has the PCM been reprogrammed recently?

[gtech]

yes the customer satisfation program 11b23 was performed a week ago, and i found the ssm 21852 and had explained it to the customer.

thanks for the info guys.