Jump to content

SuperDuty Beds

Rate this topic


Recommended Posts

I have a customer that needs a replacement short bed for a 2000 f-350 due to rot around the wheels and substructure. I started searching. All the beds are listed as 99-08 as being the same. The problem has been that all the used beds from that year range already have some form of rot. I came across a few 2011 short beds. They appear to have the same mounts, the tail lights are different - not an issue, tailgate is a little different - that to is not an issue. Parts books show different listings for the rear steps and back up camera (which the customer does not care about.) Will the 2011 beds bolt on and have the same body lines/measurements as the older models?

Link to comment
Share on other sites

I don't know the true answer to this question but it does not seem as though much has changed with the beds on these things. If I were in your position I might grab a tape measure and start doing a little measurin starting with the bed bolts.

Link to comment
Share on other sites

The 2011 has a larger fuel door, and the body line around the wheel opening is indented instead of a simple crease. Why Ford is obsessed with ugly exaggerated wheel openings I'll never understand.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...