Good socket for lower 6.7 fuel filter.

[Matt Saunoras]

This is the 32mm 3/8 drive GM oil filter socket but I've found it works great for removing the lower fuel filter on a 6.7. It's really shallow and the fitment is perfect also, it'll break the nut long before you round it off.

 

http://buy1.snapon.com/catalog/item.asp?...re&tool=all

 

Obviously not necessary but a must have for any tool junky. There are a couple on ebay right now. I was using an axle nut socket but this is much better.

[joshbuys]

I just use my deep 32mm impact socket (I bought it several years ago for a recall they had out on the Hino trucks)

[Aaron]

I needed a 36mm one awhile back for an HFCM filter, and the Mac guy sold me the SET cheaper than just the individual socket, and it came with the 32mm GM filter socket as well.

[Brad Clayton]

Just bought that same set, only 85 bucks 'Murican. Now I can change oil on anything!!!!!