Jump to content

Nasty vibration in cab after lifting to do HPFP.

Rate this topic

lmorris
 Share

Recommended Posts

lmorris

lmorris

Posted
Posted

Posted in engine section, but seems more appropriate here. 2008 F250, lifted cab for a HPFP. Now I have a nasty vibration at 1500 RPM. Lifting vehicle on the frame will cause noise to go away, then I here a snap noise on light accell turning out of parking lot and noise returns. If you hard accelerate past 1500 RPM you will not hear/feel it. Tried retorquing body mounts on the floor and was no help. Will attempt to drive with mounts loosened to see what happened.

 

Any input if greatly needed. Thanks.

 

Edit: After removing lower portion of the body mounts I was better able to see that the front 2 bolts were not centered in the hole and were contacting the body. Re-positioning the body fixed the concern.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...