mrbudge Posted April 15, 2013 Share Posted April 15, 2013 Just wondering what you guys are using to get the glow plugs out of 6.7's. The WSM says just use a deep socket without a shoulder. We are using a modded up craftsman socket, but if there was one that worked out of the box it would be better. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted April 15, 2013 Share Posted April 15, 2013 I think we touched on this in a 6.7L thread. I use a Craftsman 8mm 1/4" drive deep socket. No modification needed unless the socket has changed. Quote Link to comment Share on other sites More sharing options...
Jim Warman Posted April 15, 2013 Share Posted April 15, 2013 +1 Quote Link to comment Share on other sites More sharing options...
Matt Saunoras Posted April 16, 2013 Share Posted April 16, 2013 +2 Quote Link to comment Share on other sites More sharing options...
Bruce Amacker Posted April 16, 2013 Share Posted April 16, 2013 Harbor Freight 8mm works well, too, and the color will let everyone in the shop know you're using one. Quote Link to comment Share on other sites More sharing options...
Fordracer Posted April 16, 2013 Share Posted April 16, 2013 I use a Matco socket. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.