Bruce Amacker Posted April 19, 2013 Share Posted April 19, 2013 Hey Guys: I'm putting together a "test 6.0 PCM" to have on my desk for playing with scan tools. I have the PCM, what I need is: 1. Both rear PCM plugs. The rear one is the C1381A Body plug, 46 pin. The center one is the C1381C Engine plug, also 46 pin. I'm not sure if they are interchangeable. 2. An OBD2 connector found under the dash, hopefully with the proper pins in it to mimic a 6.0 PSD. Does anyone have any junk harnesses in their stash they could cut the plugs from? I'll need the plug assy and 6" of pigtail, damaged is OK as long as it would function. I'd be happy to pay for them. Post, call, or PM if you can help. 440-846-3885 THANKS! Quote Link to comment Share on other sites More sharing options...
Bruce Amacker Posted April 19, 2013 Author Share Posted April 19, 2013 Thanks to FordRacer who's supplying the PCM plugs. If anyone has an OBD2 connector (under the dash) I could use that. It's easy enough to get it from a boneyard if not. Thanks Guys! Quote Link to comment Share on other sites More sharing options...
lmorris Posted May 27, 2013 Share Posted May 27, 2013 You can get the DLC pigtails from Ford. Any of the ones we have here would need new wires, as the ends spread from the vehicle monitors they have plugged in. Boneyard DLC's might have the same issue, or corroded ends. Quote Link to comment Share on other sites More sharing options...
Aaron Posted May 28, 2013 Share Posted May 28, 2013 The DLC pigtail isn't cheap though. WPT-615 is the pigtail number if I recall rightly. Quote Link to comment Share on other sites More sharing options...
Brad Clayton Posted May 28, 2013 Share Posted May 28, 2013 Priced out a maf connector, 45 clams! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.