Alex Bruene Posted July 9, 2013 Share Posted July 9, 2013 I am seriously considering trying to leave the EBP tube attached to the up pipe on my next one. Works like a charm. I started doing that about 3 coolers ago. I also leave the upper in place, but remove the PCM for access. Takes longer to drain the cooling systems that it does to remove the cooler now. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted July 9, 2013 Share Posted July 9, 2013 oooh yes, I forgot that I did that on the last one I did... removing the PCM and that stupid harness bracket made life sooooo much easier. Quote Link to comment Share on other sites More sharing options...
lmorris Posted July 9, 2013 Share Posted July 9, 2013 I don't drain the secondary cooling system, just clamp off the hoses. I leave the PCM and harnesses intact as well. If you pull the cooler out a bit it's easier to get at the harness. Quote Link to comment Share on other sites More sharing options...
mchan68 Posted July 9, 2013 Share Posted July 9, 2013 I am seriously considering trying to leave the EBP tube attached to the up pipe on my next one. Takes longer to drain the cooling systems that it does to remove the cooler now. That was the first thing I noticed on my first one yesterday. Oh well, live and learn. In goes another "6.7L gravy train job" to file away in the memory bank. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.