Josh Posted May 20, 2013 Share Posted May 20, 2013 I will be doing my first 6.4 front cover tomorrow. I got it tore down today (cavitation) coolant in oil. Any tips on proper installation or tips. Thanks! Quote Link to comment Share on other sites More sharing options...
Matt Saunoras Posted May 21, 2013 Share Posted May 21, 2013 The book will have you making front cover alignment dowels out of cut off long M8x1.25 bolts. I definitely suggest you do this if you don't already have a set. Also be careful working around the plastic heater tube that runs over to the right valvecover. It is very brittle and won't give much in the way of bending. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.