Brad Clayton Posted September 12, 2013 Share Posted September 12, 2013 If you were in the market for a diesel engine stand, would you get the OTC or Norco unit, or something else all together? I like OTC stuff, but the Norco has some nice adapters for Fords power plants .http://www.norcoind.com/norco/products/model/78200A.html Quote Link to comment Share on other sites More sharing options...
lmorris Posted September 12, 2013 Share Posted September 12, 2013 We have the Norco 78200. We got ours through Rotunda. Very nice unit, and it works for transmissions too. Quote Link to comment Share on other sites More sharing options...
Matt Saunoras Posted September 13, 2013 Share Posted September 13, 2013 We have the Norco 2 post with 6.0/6.4 adapters. I am very proud of this engine stand and it never leaves my area, if I could I would marry it. Now if we could just get a decent engine crane... Quote Link to comment Share on other sites More sharing options...
vloney Posted September 13, 2013 Share Posted September 13, 2013 We just recently got the 6.7 adapters for our norco. good stand! Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted September 13, 2013 Share Posted September 13, 2013 I use the OTC - which I like but it requires the use of universal mounting brackets - I wish that I had those nice brackets that just bolt on nice and quick. I also lie to mount transmissions on it as well which has now become necessary with the introduction of the Torqshift 6. Quote Link to comment Share on other sites More sharing options...
lmorris Posted September 13, 2013 Share Posted September 13, 2013 We have L brackets made up that bolt to the tail end of the Torqshift 6 and just stand it up on the floor. Quote Link to comment Share on other sites More sharing options...
Steve Mutter Posted September 14, 2013 Share Posted September 14, 2013 We have the norco stand with the 6.0/6.4 adapters. I like it alot and its not too expensive . Quote Link to comment Share on other sites More sharing options...
Brad Clayton Posted December 14, 2016 Author Share Posted December 14, 2016 We mounted a Duramax on our Norco stand at school tonight...........geez what a pain in the ass, gong show this was. Them universal adapters can make a monkey out of ya. 1 Quote Link to comment Share on other sites More sharing options...
tonybullitt Posted January 11, 2017 Share Posted January 11, 2017 I see this is an old post but wanted to show that there are adapters for the otc stand. I have them they work great. Top one is 6.7 bottom one is 6.0/6.4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.