Jump to content

Latest PCM reflash

Rate this topic


Recommended Posts

Has anyone done the latest 6.0 Power Stroke PCM reflash?

 

The injectors cycle for 30 seconds after engine shut off.

It prevents the injectors from sticking after the vehicle sets overnight.

 

Ford has a flier you can print out for the customer, so they don't think something is wrong.

Link to comment
Share on other sites

It's not a PCM reflash... if you do a PCM flash, this FICM reprogram will come along with it but, if the PCM is at the latest calibration, you'll get the meassage "no later cailbration...". For this you'll have program only the FICM.

 

Started a thread in the TSB forum.... Did one day before yesterday that was flagging four in the AM... Yesterday it started and ran great. Did an 06E17 today and the FICM strategy was also loaded.

Link to comment
Share on other sites

Has anyone else done this reflash? I did one Friday morning that had a slight miss on cold start up. I did the reflash and on Monday morning it didn't miss, however it wasn't as cold as I would of liked it to have been.

 

I was just wondering about some of your experiences with the reflash because this customer traded the truck in and it's probably going to the auction. Also have you noticed any driveability changes? It seems like this truck ran much better after the reflash. That could of been all in my head though.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...