YukonTyler Posted August 15, 2014 Share Posted August 15, 2014 I have a customer who wants to rig up a high idle on his 2015 using upfitter number four. Is this still possible? I know on some of the older units you just picked the desired blunt cut wire down by the l/front kick panel and fed it v-batt Also, I know that I used to have a printout from Ford Fleet/Body Builders which had info on what engine speed each wire offered, but for the life of my I can't find it now. Any info like that for the brand new units? Quote Link to comment Share on other sites More sharing options...
Buddy_M Posted August 15, 2014 Share Posted August 15, 2014 http://www.fleet.ford.com/truckbbas Q-180R4 is the 2011-up diesel guide. I keep that page bookmarked just for the odd wiring I occasionally do to newer and older trucks. Quote Link to comment Share on other sites More sharing options...
YukonTyler Posted August 15, 2014 Author Share Posted August 15, 2014 Thanks a bunch! That was the stuff I was looking for. For posterity, here's the actual pdf article for SEIC/high idle on the 6.7 https://www.fleet.ford.com/truckbbas/non-html/Q180R3.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.