Bruce Amacker Posted February 20, 2015 Share Posted February 20, 2015 I don't like to get too involved with my student's tech support because it can consume all of my time, but this is a good customer. It's a 2006 6.0 no start, P2552, new CMP, new CKP, harnesses overlaid between CKP/CMP and PCM, PCM replaced and programmed, SYNCs won't change from no to yes cranking. I searched DTS with no luck. Do you guys have any experience with this code? FICM harness maybe? Thank You! Quote Link to comment Share on other sites More sharing options...
miketremblay Posted February 20, 2015 Share Posted February 20, 2015 YES CHECK THE FICM HARNESS FOR CHAFFING, ALSO HAD A BAD PCM FOR THIS DTC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.