Keith Browning Posted June 24, 2015 Share Posted June 24, 2015 Attempting to diagnose a 2006 LCF with an active 152 code. Pinpoint test H2 has you access and disconnect the BAP sensor connector C2256 and test the circuits. Okay. So I look at the location page in the EVTM - shows the sensor mounted on a bracket @ the center of the dash. I found the bracket. No sensor. No wiring. I have pulled off more trim, the IC, radio and so on looking for it. In later model years the BARO sensor is integrated into the PCM. So I had to defer to the experts on the product... Meanwhile, the Hot-Line has been working on this one for more than 5 hours now. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted June 24, 2015 Author Share Posted June 24, 2015 Found it. Taped into the harness UNDER the dash. Not up top mounted to a bracket. So much for consistency between manuals. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.