lmorris Posted March 28, 2023 Share Posted March 28, 2023 With enough determination, anything is possible. Here's the proof. 1 Quote Link to comment Share on other sites More sharing options...
forddieseldoctor Posted March 30, 2023 Share Posted March 30, 2023 Curiosity… what exactly are we looking at? I see it’s an e-locker but I have not had one open yet. Quote Link to comment Share on other sites More sharing options...
lmorris Posted March 30, 2023 Share Posted March 30, 2023 It's hard to explain. You have to try to install the ELD carrier with the tabs 180° out to be able to visualize the issue . The tabs are off set and it only goes in one way. Quote Link to comment Share on other sites More sharing options...
forddieseldoctor Posted March 30, 2023 Share Posted March 30, 2023 Gotcha. I also looked in the wsm for an 18 f150 too. It makes sense now. Someone put it in backwards for lack of better terms. Had a guy who was in my basic electrical class way back 18 years ago who told me about a limo they had that lost an axleshaft because someone ground the c-clip down to get it in. Probably because the wheel stud was against the e-brake shoes and wouldn’t push in far enough. Quote Link to comment Share on other sites More sharing options...
lmorris Posted May 12, 2023 Share Posted May 12, 2023 Not how you set driveline angle🤣 Quote Link to comment Share on other sites More sharing options...
forddieseldoctor Posted May 13, 2023 Share Posted May 13, 2023 Pinion bearings that far gone? Quote Link to comment Share on other sites More sharing options...
lmorris Posted May 15, 2023 Share Posted May 15, 2023 They just kept on driving it. It chewed up the housing eventually. They only brought it in because it no longer moved. Quote Link to comment Share on other sites More sharing options...
lmorris Posted September 25, 2023 Share Posted September 25, 2023 Mustang owners are never happy with any service performed to their vehicle. Someone else installed a short throw shifter incorrectly. I had to remove the transmission to replace a loose shift damper and installed the shifter correctly....and I'm the asshole🤪. 1 Quote Link to comment Share on other sites More sharing options...
forddieseldoctor Posted September 26, 2023 Share Posted September 26, 2023 3 hours ago, lmorris said: Mustang owners are never happy with any service performed to their vehicle. Someone else installed a short throw shifter incorrectly. I had to remove the transmission to replace a loose shift damper and installed the shifter correctly....and I'm the asshole🤪. That’s always how it goes. You are the asshole in the end. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.