garyb Posted September 20, 2016 Share Posted September 20, 2016 Trying to find a diesel compression gauge with a check valve installed into hose due to no valve in 7.3l test adapter,does any body have any suggestions, is there any fitting or kit that would fit standard diesel compression gauge? Quote Link to comment Share on other sites More sharing options...
forddieseldoctor Posted September 21, 2016 Share Posted September 21, 2016 I gave up and bought a whole gauge set from the Snap-on man a couple of years back. Quote Link to comment Share on other sites More sharing options...
Bruce Amacker Posted September 21, 2016 Share Posted September 21, 2016 Mine has it in the hose, just above the coupler. Maybe it's serviced separately from Rotunda as a service part? Quote Link to comment Share on other sites More sharing options...
garyb Posted September 21, 2016 Author Share Posted September 21, 2016 The one I got from snap on does not have valve in hose,and fitting Snapon got for me will screw in place of glow plug and has check valve but is only around 1 inch long,very difficult to attach hose and hose is in way of moving parts would like to find valve like Bruce has in pic Quote Link to comment Share on other sites More sharing options...
lmorris Posted September 21, 2016 Share Posted September 21, 2016 This is what we have in ours. http://ph.parker.com/us/en/valves-check-up-to-3000-psi-dc-series/dc-250-5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.