BrunoWilimek Posted November 7, 2016 Share Posted November 7, 2016 Got 2 of these now. Leaking and running down left side of bellhousing adapter to drip at bottom of oil pan near drain plug. follow external stain up and can't see where it starts. Looks dry in valley and at rear of left head. Anyone found a source for this? It did not drip when rad was pressure tested, so must be a slow seep. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted November 7, 2016 Share Posted November 7, 2016 Coolant fitting on the turbo. You can see it with a borescope or a mirror at the right angle with a bright flashlight. Quote Link to comment Share on other sites More sharing options...
Alex Bruene Posted November 7, 2016 Share Posted November 7, 2016 I'd agree with that. Quote Link to comment Share on other sites More sharing options...
jimmy57 Posted November 7, 2016 Share Posted November 7, 2016 You'd think snap to connect fittings would be banned from Fomoco products. On second thought this is the company that didn't seem to learn very quickly not to tamper repeatedly with spark plugs..... Quote Link to comment Share on other sites More sharing options...
BrunoWilimek Posted November 7, 2016 Author Share Posted November 7, 2016 Thanks, guys. Will check it out when it comes back next week. Quote Link to comment Share on other sites More sharing options...
BrunoWilimek Posted December 21, 2016 Author Share Posted December 21, 2016 That's what it was. The fitting closest to the driver's side was leaking. Not too bad a job when the upper intake is out of the way. Thanks Gents. I knew i could count on you. Quote Link to comment Share on other sites More sharing options...
Matt Saunoras Posted December 21, 2016 Share Posted December 21, 2016 Did you do a cab and chassis or pickup? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.