tonybullitt Posted April 21, 2017 Share Posted April 21, 2017 I have had 3 trucks in recently with nox 12 codes inspection finds that the nox sensor harness has rubbed through protection covering and wires underneath are corroded. I have been able to install the new one without the loop that is causing the wire to rub on its self. Quote Link to comment Share on other sites More sharing options...
tonybullitt Posted April 21, 2017 Author Share Posted April 21, 2017 I added a arrow where it rubs through. Wow, that heat resistant covering really wears the wires bare. My picture of the wires corroded thru the covering didn't show up so I wont be posting that. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted April 21, 2017 Share Posted April 21, 2017 You could simply secure the harness with a zip tie to prevent movement. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.