mchan68 Posted February 2, 2019 Share Posted February 2, 2019 …..and now arrives 18M06 folks!!! Everybody clap their hands!!! Quote Link to comment Share on other sites More sharing options...
Jonathan302 Posted February 3, 2019 Share Posted February 3, 2019 On 2/1/2019 at 10:42 PM, mchan68 said: …..and now arrives 18M06 folks!!! Everybody clap their hands!!! Ya i see that too...it’s about time they woke up for this concern... But how much time we will get paid to doing that... 😬 Quote Link to comment Share on other sites More sharing options...
Alex Bruene Posted October 1, 2019 Share Posted October 1, 2019 Old topic, but I'll add some insight, as this has become one of my favorite jobs... Don't forget to remove the cooling fan when you're dropping the front crossmember... As for the clamp, I take the old one of with an air hammer... When installing the new one... All with the same hand in one fell swoop, I slip an elastic band around my hand, I feed the clamp in to place, put the stud through the opening, then slide the elastic band over the 2 ends of the clamp, which will hold it together so you can put the nut on, without having to remove the heatshield. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.