Module Reprograming Battery Chargers

forddieseldoctor · January 19, 2021

I am thinking about buying or trying to get my shop to buy a new battery charger/power maintainer for programming modules. Our 2 battery chargers we do have in the shop have seen better days.

What is everyone else using? Or is there a mode in the battery charger/tester that Ford makes us have that I am no aware of?

lmorris · January 20, 2021

We purchased 3 Blue Point EEBC100A chargers. They work nice for reprogramming, voltage never goes over 13.5 volts.

batmantech · January 20, 2021

I use a Mac tools MT6340 It has a volt meter function so you can adjust the amp output to get the voltage in the correct range.

cbriggs · January 23, 2021

We have a grx3590 and a gr190 from rotunda. the gr190 is way nicer to use, but ours is on its last leg. The grx3590 is bulky and a pain in the ass to use.

forddieseldoctor · January 27, 2021

I found out that Pro Logix makes the Mac charger. The local Napa had them on sale for $100. So I bought one from them.

8WA Sman · December 31, 2022

Here is my most recent charging/battery service cart and Pro-Logix PL6800. The storage compartment has room for all my battery testers,jump pack and DSR 109.