forddieseldoctor Posted April 20, 2021 Share Posted April 20, 2021 I really wanna know wtf Ford is thinking with this recall. No additions at all. No m-time at all. You break a bleeder it’s the customer’s problem. Quote Link to comment Share on other sites More sharing options...
cbriggs Posted April 20, 2021 Share Posted April 20, 2021 Is this the f-150 master cylinder recall? If so, don't bother with the bleeder screws. Bench bleed it 5 or 6 full strokes. Once installed fill it about 1/2 way, and put it under vacuum via the filler cap ( I have an adapter that I built) with a hand held vacuum pump, for a few minutes. Done. Works every time. Quote Link to comment Share on other sites More sharing options...
forddieseldoctor Posted April 20, 2021 Author Share Posted April 20, 2021 Fusion hcu check and change fluid to dot 4. Quote Link to comment Share on other sites More sharing options...
cbriggs Posted May 3, 2021 Share Posted May 3, 2021 Ah, I see. Stuff like this makes me glad I left the dealer.... Quote Link to comment Share on other sites More sharing options...
forddieseldoctor Posted May 3, 2021 Author Share Posted May 3, 2021 It’s making me think long and hard about making changes. Quote Link to comment Share on other sites More sharing options...
lmorris Posted May 4, 2021 Share Posted May 4, 2021 Response to this recall by the techs here that had done it is not good. And we recently dropped the BG fluid/additive gig and they took our only good brake flush machine with them(it was provided by them so we could use their products)... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.