Keith Browning Posted February 20, 2007 Share Posted February 20, 2007 I can't seem to find a source for these exhaust hose tips anywhere. Anybody know of one? I could try contacting the instructor at the Ford training center I was at but I don't want to be a bother. Quote Link to comment Share on other sites More sharing options...
LARRY BRUDZYNSKI Posted February 20, 2007 Share Posted February 20, 2007 I see a tag on the neck of the tube just under the green clamps, did you happen to get any info off of them? Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted February 21, 2007 Author Share Posted February 21, 2007 No I didnt unfortunately. You hear a lot of things inclass, some of which you write down and others you assume you will remember... ahhhh yeah! Not this time. I will keep searching. Quote Link to comment Share on other sites More sharing options...
G. Bedford Posted February 21, 2007 Share Posted February 21, 2007 We are trying to come up with something to work in our shop for the exhaust,too. We only have a single over-head exhaust hose at each bay, so need to go from both tips to one hose. We had our first batch of '08s come off the transport during a recent below 0 cold spell. We had to warm them up in the shop and must say the exhaust smell will gag a maggot. Quote Link to comment Share on other sites More sharing options...
LARRY BRUDZYNSKI Posted February 28, 2007 Share Posted February 28, 2007 http://www.fumeavent.com/ 1-636-349-4400 Hey guy's just ran across this site, it's for Fire engines but looks like the same kind of setup. Check it out they call the ends Source Capture Nozzles, maybe we'll get lucky and come up with the correct hose ends. Thanks to Ford for cutting these exhaust ends at a angle. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted May 11, 2007 Author Share Posted May 11, 2007 GOT IT! /forums/images/%%GRAEMLIN_URL%%/rockon.gif My brother went for a transmission class and got the information off the cone adapters which came from Sourcetec in friendly Canada. I havent gone and priced it out yet. http://www.sourcetecindustries.com/products/automotive.php?190 Quote Link to comment Share on other sites More sharing options...
LARRY BRUDZYNSKI Posted May 12, 2007 Share Posted May 12, 2007 Keith just a thought... If these exhaust hose ends are attached to the vehicle, and it goes into regen do you think that the hose will handle the extreme temps? Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted May 12, 2007 Author Share Posted May 12, 2007 Larry, I have already thought of that and as a matter of fact, the hoses at the training center melted after multiple regenerations. I do know that there are flexible aluminum hoses built (for just this application) but again, I have not priced anything out. Having thought about this, I am thinking of trying the "hood" concept but in vertical fashion. Going to Lowe's or The Home Depot I want to look at HVAC registers or any type of ducting that is box like and large enough to fit around the exhaust tips loosely - fabricate a stand for it and connect it to a regular exhaust hose. I think this will also draw enough fresh air along with the exhaust to keep things cool enough in the event of an inadvertent regen. Remember, the service manual AND IDS warn us to perform regenerations outdoors only. We have to come up with something... /forums/images/%%GRAEMLIN_URL%%/flamethrower.gif Quote Link to comment Share on other sites More sharing options...
exmod110 Posted December 2, 2008 Share Posted December 2, 2008 So has any one made or bought something to use on the 6.4's tail pipes? I am looking for ideas to throw at the local sheet metal fab shop to get something made up.... some pics would be great! Cheers Don Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.