Keith Browning Posted March 12, 2007 Share Posted March 12, 2007 I had my first patient today. An 08 with the MIL on, no driveability concerns. Code P0128: Indicates that the thermostat monitor has not achieved the required engine operating temperature within a specified amount of time after start up. Everything checked out okay so I contacted the Hot Line. Apparently the parameters are too tight for this code in cold weather climates. There will be a new calibration coming out soon and this concern is one that will be resolved. The calibration R17 will address this and several other small concerns. I was told that soon means the end of this month, March 2007. Quote Link to comment Share on other sites More sharing options...
DieselD Posted March 12, 2007 Share Posted March 12, 2007 one of many I am sure Quote Link to comment Share on other sites More sharing options...
gasgasman Posted March 15, 2007 Share Posted March 15, 2007 Remember: "Quality used to be Job 1" Quote Link to comment Share on other sites More sharing options...
Diesel Jay Posted March 15, 2007 Share Posted March 15, 2007 If I were a betting man, I'd wager on more than just one "reflash" coming down the pipe. /forums/images/%%GRAEMLIN_URL%%/wink.gif - Jay Quote Link to comment Share on other sites More sharing options...
eastendpowerstroke Posted March 16, 2007 Share Posted March 16, 2007 FIX IT RIGHT THE FIRST UUUHHH THIRD TIME /forums/images/%%GRAEMLIN_URL%%/readthis.gif Quote Link to comment Share on other sites More sharing options...
DamageINC Posted March 16, 2007 Share Posted March 16, 2007 Remember: "Quality used to be Job 1" Hehe yeah, I saw this pic once, with the Ford logo and the motto: "Quality is Job #1" Then in really tiny letters at the bottom it said: "Recalling our quality products is Job #2" Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.