Jump to content

LCF PTO

Rate this topic


Recommended Posts

Does anyone know of a way to allow the pto to operate with the vehicle in neutral? The truck has a rolloff deck on it and he needs the truck to creep ahead as the platform comes off the truck.

Link to comment
Share on other sites

Jeff, It took me a while to realize this but this is a body builders topic therefore this information is not found in the service publications, or at least I could not find it. I did find it at the Ford Fleet site though.

 

Go to: https://www.fleet.ford.com/truckbbas/non-html/2006/bblblcf.pdf and navigate your way to page 28 for PTO wiring information.

 

The PTO can operate in stationary OR mobile applications therefore it should not matter what position the gear selector is in depending on how it is wired up. You can enable the PTO, raise the idle or limit PTO operation to certain conditions. Someone may have wired that truck so that the PTO only works with the truck in park, or with the parking brake on, etc...

 

For actual wiring diagrams consult the wiring diagram manual, section 140, which is the "Customer Access" cell.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...