Fredsvt Posted May 10, 2007 Share Posted May 10, 2007 maybe this will help someone 2004 f250, no start, codes P0611 and P1378. I found no power to the FICM and the relay not activating. The tan/yellow wire to the relay (+ trigger) was dead. I had power from the CJB. But no power to the connector on the inner fender. I unplugged all of the connectors there and pulled up the harness to find that wire, and only that one exposed and rubbed through to green death on the plastic wheel well liner. Repairing the wire and putting some flex loom on the harness that nearly sits in the elements should hopefully keep the wires whole. Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted May 10, 2007 Share Posted May 10, 2007 Funny you bring this up. I just made a repair to an'03 that someone had installed the incorrect IDM power relay in the relay box. It burned up the relay and the large green wire not to mention the plastic housing. Once again my salvaged harness box saved the day! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.