DwayneGorniak Posted July 12, 2007 Share Posted July 12, 2007 Only 500 km's (300Miles) on this one. The high pressure fuel rail to rocker bed seal on the driver head was leaking. The seal was in two pieces and was obviously damaged upon assembly. This is a leak that I can possibly see some mistaking for something else. Was puking oil down the back of the head and blowing back all over the tranny. If you look close at this top picture, you can see the seel has sperated and the inner ring is close to the nut. The shinyness in this second picture is my flashlight from behind the seal. This last photo is the bad seal on the left and the brand new one on the right. Quote Link to comment Share on other sites More sharing options...
GregH Posted July 12, 2007 Share Posted July 12, 2007 Nice job, man! Quote Link to comment Share on other sites More sharing options...
STROKER_T Posted June 9, 2010 Share Posted June 9, 2010 Dwayne...what method did you use for seal replacement...does the rails need to come off...? Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.