sajeev Posted August 9, 2007 Share Posted August 9, 2007 CAN ANYBODY TELL ME WHAT IS MEANT BY TORQUE CONVERTER CROSS FLOW Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted August 9, 2007 Share Posted August 9, 2007 Torque converter cross flow is an engineering term for the amount of flow passing from the turbine, through the stator, and against the impeller. Blade angle and design affect cross flow and stall. Quote Link to comment Share on other sites More sharing options...
WGLR13MWZ Posted August 11, 2007 Share Posted August 11, 2007 Torque converter cross flow is an engineering term for the amount of flow passing from the turbine, through the stator, and against the impeller. Blade angle and design affect cross flow and stall. And then Keith walked on water..... Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted August 11, 2007 Share Posted August 11, 2007 Quote: And then Keith walked on water..... Not exactly. I walk across engineers floating in the water. I have wondered what that term meant in the past while reading the manual. When Sajeev posted the question I decided it was time to ask the real experts. I wrote the Gents at the HotLine! The post above is that answer. Quote Link to comment Share on other sites More sharing options...
sajeev Posted December 22, 2009 Author Share Posted December 22, 2009 Thankyou very much Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.