DieselD Posted August 14, 2007 Share Posted August 14, 2007 I have got a hard one for you guys. We have a 07E350 here thats a converted short bus. The air bag light is on with a B1881. basically the pretensioner is missing since obviously there is no seat. Someone the body builder missplaced the resistor that comes on the truck when built and cut the wires to the plug. All I have is 2 cut wires for the pretensioner that is not there. My parts guys and myself have been looking for the part number for a yellow connector with a resistor in it to allow the module to think there is a seat there. anyone run into this issue? I need a part number if possible the bullitin number is Q93 https://www.fleet.ford.com/TRUCKBBAS/non-html/Q93.pdf Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted August 14, 2007 Share Posted August 14, 2007 Did you check the module configuration? I saw a few busses that were built at the same time that were looking for pretensioners and a right side airbag... they only had the drivers side airbag, no pretensioner. I reconfigured the module and let it know how the van was really equipped. Have the 07's changed? Quote Link to comment Share on other sites More sharing options...
LARRY BRUDZYNSKI Posted August 14, 2007 Share Posted August 14, 2007 I think the resistor you want is a XF3Z14B022AA. The parts locator has a few dealers showing it in stock. The description on the part is "resistor assy a/bag frt snsr" Quote Link to comment Share on other sites More sharing options...
DieselD Posted August 15, 2007 Author Share Posted August 15, 2007 yes I did check configs, however the code is for an open curcuit and thats just what it was. I traced the wires back to find the wires cut that would go to a pretensioner or in this case the resistor. I found the pigtail from a buddy next door in car service. once I showed him the picture of the part I had he knew what it was and had one!. he just called it a shorting bar so we lost some info in translation I guess. I got it all in and back to the customer yesterday. yes larry that is the part I ordered by looking a the HBOM. what a pain! thanks for your help. I already ordered it when I saw this but looking at the number being the same makes me feel better in getting the right thing. Once mine comes in I will have an extra Quote Link to comment Share on other sites More sharing options...
LARRY BRUDZYNSKI Posted August 15, 2007 Share Posted August 15, 2007 Good deal, glad to help /forums/images/%%GRAEMLIN_URL%%/cheers.gif Quote Link to comment Share on other sites More sharing options...
OHNO60 Posted August 15, 2007 Share Posted August 15, 2007 HEY ROCK HAD SAME ISSUE. TRUCK WAS NEWSPAPER DELIVERY E450, PURCHASED AS A REGULAR CUTAWAY INSTEAD OF THE DEALER ORDERING THE PASSENGER SEAT DELETE OPTION. TRUCK BLASTED IN ACCIDENT AND BODYSHOP REPAIRED. I ORDERED THE EXACT SAME RESISTER,PLUGGED IN FINE BUT RESISTANCE STILL OFF AND KEPT LAMP ILLUMINATED. ONLY WAY TO OVERCOME IS BOLT A PRETENSIONER TO TRUCK BODY OR HAVE THE CUSTOMER FILL OUT THE PASSENGER DELETE FORM WITH THE NAT HIGHWAY TRANSPORTATION BOARD AND FORD WILL CONTACT YOU WITH A PARTNUMBER OF A MODULE THAT IGNORES THE PASSENGER PRETETIONER. BEEN DOWN THAT ROAD WITH THAT FRIGGEN RESISTER. CUSTOMER WANTED TO BUY AND HAVE MOUNTED A PRETENTIONER. WHOLE ISSUE WAS CRASH EVENT DTC AND MODULE INSTALLED HAD NO PART NUMBER FROM FORD??? /forums/images/%%GRAEMLIN_URL%%/puke.gif Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.