Keith Browning Posted September 21, 2009 Share Posted September 21, 2009 6.0L Diesel Stand Pipe O-Rings: Now Only Available in Kits O-Ring part numbers W301386, W301390 & W302209 are no longer available per Ford Diesel Engineering. The O-Rings are now included in the Stand Pipe assembly (base 9A332) or the Stand Pipe Plug (part number W302195). Quote Link to comment Share on other sites More sharing options...
Bruce Amacker Posted September 21, 2009 Share Posted September 21, 2009 I don't get this at all. Is this a thinly veiled way to increase revenue? Quote Link to comment Share on other sites More sharing options...
Aaron Posted September 22, 2009 Share Posted September 22, 2009 They got tired of having to repackage the International Harvester ones Quote Link to comment Share on other sites More sharing options...
Keith Browning Posted September 22, 2009 Author Share Posted September 22, 2009 I personally find these o-rings a little difficult to install and usually require some muscle and a pick to get the deeper ones on. I can see some potential to scrape up the standpipes and or damage the rings. Only the end seals can be popped on with a socket. Quote Link to comment Share on other sites More sharing options...
joshbuys Posted September 22, 2009 Share Posted September 22, 2009 +1. I usually stick them in the freezer for a couple hours after installing o-rings on them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.