International Tech Posted February 20, 2007 Share Posted February 20, 2007 HI guys. I have a friend that has the passenger side rear injector/glow-plug connector at the valve cover melt. I was wondering if any of you fellow techs have any spare connector ends or harnesses that i could get from you. Only 2 of the pins melted in the connector. Thanks! Quote Link to comment Share on other sites More sharing options...
Buddy_M Posted February 20, 2007 Share Posted February 20, 2007 Heres a couple International numbers I have written down, still comes in handy for the melted harnesses I come across. 1830829C91 - Terminal kit 1661875C1 - Pin kit 2501055C1 - Pin kit IIRC, the terminal kit is the shells & seals, and the other two are just pins, and pins with wire leads. Buddy Quote Link to comment Share on other sites More sharing options...
LARRY BRUDZYNSKI Posted February 20, 2007 Share Posted February 20, 2007 Summit motor products 827 Ridgewood ave North Brunswick, NJ 08902 800-275-1043 Old style 5 pin part # 10604 about $11.00 New style 9 pin part # 10631 about $20.00 These work very well!!! I have a few in stock if needed quickly. Quote Link to comment Share on other sites More sharing options...
International Tech Posted February 21, 2007 Author Share Posted February 21, 2007 Thanks alot guys! My parts guys were telling me that i would have to replace the entire harness. Thanks for the info! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.